How To Tie Your Sneaker Laces

How To Tie Your Sneaker Laces

Laces are the most important part of running shoes that affect the safety and comfort of the athlete’s foot during competitions or training. Therefore, the ability to tie the laces on sneakers correctly is considered a necessary skill that should be brought to automatism.
The physiological features of the legs of each person may differ significantly. For example, the width or lift of the foot. Thus, you need to choose the most appropriate way to tie your shoelaces, so that your feet are as comfortable as possible. In addition, evenly distribute the pressure and degree of fixation.

If a person uses different types of sports shoes in everyday life, then most often they are interested in the question of how to tie laces on sneakers in a beautiful, original and fashionable way. In fact, the criss-cross option with a bow, which is familiar to everyone from childhood – is a classic, but it is far from the only way to lace up and you can easily master several other techniques.
Next, we’ll take a step-by-step look at how to tie shoelaces on sneakers and highlight the most interesting and popular ways of lacing both with and without a bow. In addition, we will learn how to make sure that the laces on your sneakers are never untied.

RecommendationTake a close look at the photo diagram and read the step-by-step instructions.

HOW TO TIE SHOELACES ON SNEAKERS WITH A BOW-STEP-BY-STEP 12 WAYS

Ladder

Lacing ladder

  1. Pass the string through the bottom holes on the inside and pull both ends up to get two equal parts-A (orange) and In (red).
  2. Then thread each piece through the hole opposite from the outside.
  3. Next, twist the lace so that part B is above part A and both parts pass under the sides (see photo).
  4. Thread both pieces again through the hole opposite from the outside and interlace as indicated in the previous step, only now part A should be above part B.
  5. Go the same way to the upper holes on the sneaker.

Zipper

Lacing zipper (zipper)

  1. Thread the string through the bottom holes on the inside and pull both ends up to get two equal parts-A (orange) and In (red).
  2. After that, pull both parts under the loop and intertwine them so that part B is above part A.
  3. Next, pull each piece through the second bottom holes and re-weave as in the previous step.
  4. Repeat step 2 and 3 until the last holes on the top of the sneaker.
  Rules for perfect sex: tips for men

Double back

Double back lacing

  1. Thread the string from the outside down through the second top holes, forming two equal parts – A (orange) and In (red).
  2. Next, twist the lace so that part A is above part B.
  3. Pass each piece through the fourth top hole on the outside.
  4. Then re-intertwine the two pieces. Now part B should be above part A.
  5. Thread both pieces through the last bottom holes on the outside, and then through the second bottom holes on the inside.
  6. In the final step, pull each piece into the empty top holes. First the third, and then the first.

Loop back

Lacing Loop back (reverse loop)

  1. Pass the string through the bottom holes on the inside and pull both ends up to get two equal parts-A (orange) and In (red).
  2. Intertwine both parts as shown in the photo diagram. As you can see, in the future, each part of the lace will be located only on one side of the sneaker.
  3. Go all the way to the top of the sneaker, threading each hole from the inside and simultaneously twisting both parts of the lace (step 2).

Bush walk

Lacing Bush walk (forest walk)

  1. First, thread the string through the bottom holes on the inside, forming two equal parts – A (orange) and In (red).
  2. Next, pass part A through the second lower hole on the outside, and then from the inside also through the second hole located opposite.
  3. After that, from the outside, thread part B through the third hole from the bottom, and part A through the fourth.
  4. Then pull both parts from the inside through the holes opposite.
  5. At the last stage, repeat the steps similar to steps 3 and 4 (see photo).

Saw tooth

Saw tooth lacing

  1. Thread the string through the bottom holes on the outside and align the two pieces – A (orange) and In (red).
  2. Pull part A through the inside of the second hole from the bottom, and then through the outside of the second hole opposite.
  3. Stretch part B diagonally under part A and pass it through the third hole from the bottom on the inside, and then through the third hole from the bottom on the outside opposite.
  4. Go all the way to the top of the sneaker, applying the same steps to part A as in step 3, and to part B in step 2.

Foot bag

Lacing Foot bag

  1. Pull the string through the third bottom holes on the inside and form two equal parts-A (orange) and In (red).
  2. Pass both parts through the second bottom holes on the outside.
  3. Thread both pieces through the bottom holes on the inside, and then pull through the third top holes on the outside.
  4. Next, twist the lace so that part A is above part B.
  5. Thread part A through the second and first (diagonally) top hole on the inside.
  6. Perform the same actions as step 5 with Part B.
  Premature Ejaculation

Hash(hash)

Lacing Hash (Hash)

  1. Pass the string through the bottom holes on the inside and pull both ends up to get two equal parts-A (orange) and In (red).
  2. Twist the string so that part B is above Part A.
  3. Thread both pieces through the fourth-bottom holes on the outside, and then through the third-bottom holes on the inside.
  4. Repeat steps 2 and 3 to the top of the sneaker.

Twistie

Lacing Twistie (torsion)

  1. Thread the string through the bottom holes on the inside and pull both ends up to get two equal parts-A (orange) and In (red).
  2. Intertwine both parts together (a full turn).
  3. Pass each piece through the second bottom holes on the inside.
  4. Continue with steps 2 and 3 until you reach the top of the sneaker.

Riding bow

Lacing Riding bow (horse riding)

  1. Place the shoelace diagonally inside the sneaker and pull part A (orange) through the bottom hole on the left, and part B through the top hole on the right.
  2. Next, thread part B through the top left hole on the outside and diagonally through the second top right hole on the inside, that is, forming a zigzag.
  3. Repeat step 2 until you reach exactly the middle of the sneaker.
  4. Starting from the bottom of the sneaker, follow steps 2 and 3 with part A.

Lattice (grid)

Lacing Lace (mesh)

  1. Pull the string through the bottom holes on the inside and pull both ends up to get two equal parts-A (orange) and In (red).
  2. Then twist the string so that part A is above part B and thread each of them through the fourth holes from the bottom on the outside.
  3. Now thread both parts of the lace through the fifth holes from the bottom opposite from the inside.
  4. Next, re-intertwine each piece with each other (step 2) and thread through the second bottom holes on the outside.
  5. Then pass both parts into the third bottom holes opposite from the inside.
  6. Once again interweave both parts, observing the structure of the previous weaving (see photo), and thread the ends of the lace through the upper holes on the inside.
  How To Choose A Men's Perfume

Bi-colour (two-tone)

Bi-color lacing (two-tone)

  1. Prepare two different colored and slightly elongated shoelaces. For example, orange (part A) and red (Part B). At the same time, part B should be somewhere 25-30% longer.
  2. Tie both pieces tightly together and carefully trim the ponytails.
  3. Starting on the lower right side, extend part B to the top of the sneaker through the holes as shown in the photo.
  4. Starting from the second hole from the bottom on the right side, perform the same steps as step 3 with Part A.

HOW TO TIE SHOELACES ON SNEAKERS WITHOUT A BOW-STEP-BY-STEP 3 WAYS

Checkboard

Lacing Checkboard

  1. Prepare two different colored shoelaces. For example, orange (part A) and red (Part B). It is desirable that the laces are long and wide.
  2. Starting from the bottom left, pull part A through each hole of the sneaker to the top (see photo).
  3. Interlace part B with Part A (see photo).
  4. In the last step, carefully tuck the ends of each piece of lace inside the sneakers.

Display

Lacing Display

  1. Pass the string through the bottom holes on the outside and pull both ends up to get two equal parts – A (orange) and B (red).
  2. Then, alternately intertwining the parts with each other, thread each hole from the outside diagonally to the very top of the sneaker.

Hidden Knot

Lacing Hidden Knot

  1. Pass the string through the bottom holes on the outside and pull both ends up to get two equal parts-A (orange) and In (red).
  2. Thread part A through the second bottom hole on the inside , and then through the second opposite hole on the outside.
  3. Pass part B through the third hole from the bottom from the inside, and then through the third opposite from the outside.
  4. By analogy with step 3, and on the two holes at the top with step 2, stretch both parts of the lace to the top of the sneaker.

In general, there are incredibly many options for tying shoelaces. For example, in the collection of the famous Australian “lacing specialist” Ian Figen today there are 50 different techniques. If desired, anyone can come up with some new method and give sports shoes a unique look. In short, wear the best men’s running shoes, play sports and learn to tie your laces correctly and beautifully.

                                                     READ ALSO 

 

Leave a Reply

Your email address will not be published.